Features
Diversified feeder, single impeller/ double impeller / flower basket
Select according to powder characteristics
With/without hand wheel operation, Synchronization/Servo Motor Configuration
Free choice by the customer as needed
Central lubrication system
Precise control of oil level at each point position
Mechanical pressure support
Prevent oil leakage pollution
Double pressure forming
Better tablet molding effect
Mirror treatment on the middle turret surface
Better solve the problem of powder dumping
Lower punch damping
Better loading precision and reduced vibration
Pressure overload protection
Better protection for equipment and personal installation
21" extra large Taiwan Advantech PC
Better HMI
Product Parameters
| Max long axis of shaped tablet | <25mm | <19mm | ≤16mm |
| Middle diameter | Φ38.10mm | Φ30.16mm | Φ24.00mm |
| Punch diameter | Φ25.35mm | Φ19.00mm | Φ19.00mm |
| Punch length | 133.60mm | ||
| No - load noise | ≤78dB | ||
| Main motor power | 7.5kW | ||
| Equipment dimensions | 820×1100×1940mm | ||
| Net weight of equipment | 1700kg | ||
| Remarks |
Capacity: The actual production speed of the equipment is related to the actual conditions of tablet pressing, such as the conditions of powder (fluidity, compressibility, uniformity of powder density), the shape and size of the produced tablet, and the pressing force. Mold use: For the same powder, the larger the tablet, the greater the pressing force required during production, resulting in the greater the friction between the punch and the guide rail, the greater the vibration of the equipment, and the greater the wear of the punch, guide rail and press wheel. Therefore, in the production of tablets, the service life of the mold shall also be considered while pursuing yield. |
||